Sony CMT-U1BT Operating Instructions Manual page 29

Hide thumbs Also See for CMT-U1BT:
Table of Contents

Advertisement

Notes on discs
• Before playing, wipe the disc with a cleaning
cloth from the center out to the edge.
• Do not clean discs with solvents, such as
benzine thinner, or commercially available
cleaners or anti-static spray intended for
files/
vinyl LPs.
• Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.
ded in
On safety
MP3
• Completely disconnect the power cord
/Level
(mains lead) from the wall socket (mains)
if it is not going to be used for an extended
n that
period of time. When unplugging the unit,
always grip the plug. Never pull the cord
ty,
itself.
re
• Should any solid object or liquid get into
an
the system, unplug the system, and have
it checked by qualifi ed personnel before
rrectly
operating it again.
G 1
• Th e AC power cord can be changed only by a
qualifi ed service facility.
ple,
On placement
• Do not place the system in an inclined
r
position or in locations that are extremely
hot, cold, dusty, dirty, or humid or lacking
s
adequate ventilation, or subject to vibration,
direct sunlight or a bright light.
k that
• Be careful when placing the unit or speakers
on surfaces that have been specially treated
(for example, with wax, oil, polish) as
staining or discoloration of the surface may
result.
• If the system is brought directly from a cold
to a warm location or is placed in a very
damp room, moisture may condense on
the lens inside the CD player, and cause the
system to malfunction. In this situation,
remove the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
CMT-U1BT.GB.2-683-494-61(1)
On heat buildup
• Heat buildup on the unit during operation is
normal and is not cause for alarm.
• Do not touch the cabinet if it has been used
continuously at a high volume because the
cabinet may have become hot.
• Do not obstruct the ventilation holes.
On the speaker system
Th is speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted. In
this situation, turn off the TV, wait 15 to 30
minutes, and turn it back on. If there is no
improvement, move the speakers far away from
the TV.
Cleaning the cabinet
Clean this system with a soft cloth slightly
moistened with a mild detergent solution.
Do not use any type of abrasive pad, scouring
powder, or solvent, such as thinner, benzine, or
alcohol.
GB
29

Advertisement

Table of Contents
loading

Table of Contents