Answerphone troubleshooting.....
P R O B L E M S
- Answerphone icon is
blinking on the display.
- The answerphone has not
recorded your outgoing
message.
- The answerphone has
stopped.
Declaration of Conformity :
We,
PHILIPS Consumer Electronics
Route d'Angers
72081 Le Mans Cedex 9
France
Declare that the products DECT211xx and DECT 215xx are in compliance with ANNEX III of the R&TTE-
Directive 1999/5/EC and then with the following essential requirements :
Article 3.1 a : (protection of the health & the safety of the user)
EN 60950-1 (2000)
Article 3.1 b : (protection requirements with respect to electromagnetic compatibility)
ETSI EN 301 489-6 V1.2.1 (08/2002) & ETSI EN 301 489-1 V1.3.1 (09/2001)
Article 3.2 :
(effective use of the radio spectrum)
EN 301 406 (2003)
The presumption of conformity with the essential requirements regarding Council Directive 1999/5/EC is
ensured.
Date : 24/02/2004
Quality Manager
DECT & Home Telephony
The product can only be connected to the analogue telephone network in the
countries indicated on the back cover of this manual.
The
accordance with the Directive 1999/5/EC for the safety of the user, electromagnetic
perturbations and for radio spectrum.
www.philips.com/faqs/dect
16
The answerphone memory is full
The answerphone memory is full.
The answerphone memory is full.
Le Mans
marking certifies compliance with technical regulations in
C A U S E S
S O L U T I O N S
Consult and delete messages to
free sufficient memory. (p 9)
Consult and delete messages to
free sufficient memory. (p 9)
Consult and delete messages to
free sufficient memory. (p 9)