Road View RV-330LC User Manual page 10

Settings_Sensitivity & LCD Off
Sensitivity
LCD Off
∙ Sensitivity can be set to Off, Low, Normal 1, Normal 2, Normal 3, High, or Very High.
∙ Impact registration above the specified sensitivity setting while the vehicle is on the move
or parked triggers event recording.
Caution)
∙ "Very High" is so sensitive that the black box can recognize bumps on the road or even
loud noises from inside the cabin as event recording triggers. If this occurs, try lowering
the sensitivity setting.
∙ "Off" instructs the black box not to initiate event recording even if actual impact has been
registered. Remember this before using the "Off" setting.
(In Parking mode, event recording will still take place even if Sensitivity is set to "Off")
∙ LCD Off can be set to 30 secs, 1 min, 5 mins, Clock, or Always On.
∙ The LCD will turn off automatically after the specified duration of inactivity.
∙ To turn the LCD back on, simply tap on it.
∙ Setting LCD Off to Clock displays the current date and time after 1 minute of inactivity.
Current date and time are shown while receiving GPS signals.