Adjusting; In-Flight & Other Uses - Plantronics Pulsar 590 Manual

ADJUSTING

1
Position so that telescoping voice
tube is on right ear. Adjust headband
if desired.
9
2
Point telescoping voice tube tip
toward mouth and extend for optimal
voice transmission.
IN-FLIGHT AND OTHER USES
In-flight cable can be used with any
3.5mm audio jack to convert your
wireless Pulsar 590 headset into
wired headphones.
1. Power headset off. (1) In-flight
cable will not operate when
headset is powered on.
2. Insert in-flight cable into
3.5mm jack on left earpiece. (2)
Note: Telescoping
voice tube is
disabled when
in-flight cable is
in use.
10