Ventis MX4 Product Manual page 20

Ventis™ MX4 Product Manual
Calibration Gas Set Screen
Displays the existing calibration gas
value for each installed sensor.
If any one of the sensors is not installed,
its position on the display is blank.
Clock Set Screen
Displays the existing time values using a
24-hour time format.
Date Set Screen
Displays the existing date. The value
displayed on the far left is the month
and to its right the day. The year is
displayed beneath the day.
Display Mode Set Screen
Options
0 = Numeric Mode
1 = Text Mode
© 2014 Industrial Scientific Corporation
Press ON/OFF/MODE to bypass the calibration gas set process and
advance to the Clock Set Screen.
Press ENTER to begin the calibration gas value set process.
On the display, the first sensor subject to change flashes.
Press ENTER to edit the value, if needed; press repeatedly or
hold down to speed the increment pace.
Press ON/OFF/MODE to set the value.
The next sensor subject to change flashes. Continue to use the
ENTER and ON/OFF/MODE buttons, respectively, to edit and
set each sensor's calibration gas value.
After calibration gas value is set for each installed sensor,
press ON/OFF/MODE to advance to the Clock Set Screen.
Press ON/OFF/MODE to bypass the clock set process and advance to
the Date Set Screen.
Press ENTER to begin the clock set process.
On the display, the first time value subject to change flashes.
Press ENTER to edit the value, if needed; press repeatedly or
hold down to speed the increment pace.
Press ON/OFF/MODE to set the value.
The next value subject to change flashes. Use the ENTER
and ON/OFF/MODE buttons, respectively, to edit the value.
After all values are set, press ON/OFF/MODE and
advance to the Date Set Screen.
Press ON/OFF/MODE to bypass the date set process and advance to
the Display Mode Set Screen.
Press ENTER to begin the date set process
On the display, the first date value subject to change flashes.
Press ENTER to edit the value, if needed; press repeatedly or
hold down to speed the increment pace. Press ON/OFF/MODE
to set the value.
The next date value subject to change flashes. Continue to use
the ENTER and ON/OFF/MODE buttons, respectively, to edit
and set each value.
After all values are set, press ON/OFF/MODE and
advance to the Display Mode Set Screen.
The display mode selected determines whether the monitor user will see
a numeric or text display (including alarm displays) when the monitor is in
the gas monitoring mode.
Press ENTER to edit the value, if needed.
Press ON/OFF/MODE to set the value and advance to the Confidence
Indicator Set Screen.
20