Telephone Network Information - Reliance Controls THP401 Owner's Manual

Phone-alert automatic phone-out monitoring system
Table of Contents

Advertisement

answering system, computer modem, etc.) connected to the same line is in use.
Caution - This equipment cannot report an alert if it is not wired in series and ahead of other customer owned
equipment when other equipment (telephone, answering system, computer modem, etc.) connected to the same
phone line is in use.
Recommended Installation To Insure That Alert Calls Will Be Made:

Telephone Network Information

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
If this equipment, Model THP401, causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone
company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the
FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty information, please contact Reliance Controls
Corporation at 800-439-5745 or email support@reliancecontrols.com. If the equipment is causing harm to the telephone
network, the telephone company may request that you disconnect the equipment until the problem is resolved.
This equipment is not intended for use on party lines.
This device uses an AC to DC power adapter. The AC power adapter should be plugged into a surge protector.
10

Advertisement

Table of Contents
loading

Table of Contents