Features
Monitors for power loss and low temperature
Calls up to four programmed telephone numbers when an alert condition occurs
Adjustable low temperature setting
Optional water sensor included, security sensors can be added
Built-in automatic battery backup
Quick Start Instructions
I.
Installation
1. Connect the base unit: the center jack on the base unit is labeled "To Wall
Phone Jack". Use a standard telephone cord to connect to an active telephone
jack.
2. Connect power: use the included AC adapter to connect the "Power Jack" to a
standard 120 volt receptacle.
3. Install battery: the included battery must be connected in the rear compartment.
4. Optional: connect a telephone to the "To Phone" jack.
5. Optional: connect the included water sensor to the "Water Sensor" jack.
II.
Programming
1. Press and hold the star (*) key for three seconds to enter the programming
menu.
2. Use the up and down arrow keys to move between menu items.
3. Use the Data Enter key to select a menu item and to save data after entry.
4. Use the Esc key to delete an entry or return to a previous menu.
III.
Operation
1. Press and hold the pound or hash key (#) for three seconds to arm and disarm
the call out function. If a disarm password has been programmed you will be
asked to enter this number to disarm (the default password is
system will display HOME on the screen and an armed system will display
AWAY.
2
1234).
A disarmed