Install The Wifi Extender; Place The Extender And Apply Power; Connect To An Existing Wifi Network - NETGEAR WN2500RP Installation Manual

Install the WiFi Extender

Place the extender, apply power, and connect it to your WiFi network.

Place the Extender and Apply Power

1. Place your extender in the same room as your WiFi router.
Note: Proximity to the WiFi router is required only during the
initial setup process.
2. Connect the power adapter to the extender and plug it into an
electrical outlet.
The Power LED

Connect to an Existing WiFi Network

To extend the range of your WiFi network, you must connect the
extender to your existing WiFi network. You can do this in one of two
ways:
• Connect with WPS. For more information, see
WPS on page 8.
• Connect with the genie web browser setup. For more
information, see
page 10.
lights solid green.
Connect with NETGEAR genie Smart Setup
7
Connect with
on