NETGEAR WN2500RP Installation Manual page 19

Will the extender work if I connect it to the router with an
Ethernet cable?
No. The extender is designed to connect wirelessly to the router or
access point.
What are the user name and password to log in to the extender?
The user name is admin, and the default password is password.
Both are case-sensitive.
How do I restore the extender to its factory default settings?
1. Use a sharp object such as a paper clip to press and hold the
Factory reset button on the extender for at least five seconds
until the Status LED blinks amber.
2. Release the Factory reset button and wait for the extender to
reboot.
The extender resets and returns to the factory default settings.
You can now access the extender from your web browser using
the factory default settings.
19