Fujioh range hood buf-011/021 operation manual (24 pages)
Summary of Contents for Fujioh SLM-600
Page 1
Operating / Installation Manual SLM-600/700/900V(Ventilating Type) SLM-600/700/900R(Recycling Type) Please read this manual carefully before using this appliance.
Page 2
Please retain all attached literature and your receipt for purchase of this appliance for future reference. Please note: FUJIOH INTERNATIONAL TRADING PTE. LTD. reserves all rights to the final interpretation of the content of this manual. Please be aware that you will not be otherwise notified in the event of any future amendments to the content.
Contents Contents ------------------------------------------------------ 1 Safety P recaut i ons---------------------------------------------- 2 Packaging C ont ent s--------------------------------------------- 2 Technical S peci f i cat i ons------------------------------------------3 Wiring Diagram -------------------------------------------------3 Name of Parts ------------------------------------------------4 Installation ------------------------------------------------- 6 Operating Method ---------------------------------------------- 9 Points to Note on Maintenance -----------------------------------10 Self-Check ------------------------------------------------12 Service and Parts...
Safety Precautions 1. The bottom of the cooker hood should be at least 750mm away from the gas stove. If the gas stove installation instructions stipulate a larger clearance, this should be taken into account. 2. The exhaust duct outlet should extend outdoors, or fed a public cold air into a duct, and tightly sealed at the joint.
Technical Specifications SLM-600/700/900V(Ventilating Type) Power Consumption Rated Voltage Frequency Power Consumption Air Flow Sound Speed (Hz) with Lamp(W) (m /h) (dB) SLM-600/700/900R(Recycling Type) Power Consumption Rated Voltage Frequency Power Consumption Air Flow Sound Speed (Hz) with Lamp(W) (m /h) (dB)
Name of Parts SLM-600/700/ 900V(Ventilating Type) Lamp box Exhaust port Outlet cable block Frame external chamber Frame top plate Frame structure Switch Connection base Switch bracket Fixed part of lamp base Capacitor Lamp base Bulb Internal chamber Seal strip Fixed part...
Page 7
Name of Parts SLM-600/700/900R(Recycling Type) Lamp box Outlet cable block Frame external chamber Frame top plate Frame structure Switch Connection base Switch bracket Fixed part of lamp base Capacitor Lamp base Bulb Internal chamber Seal strip Seal strip Filter cartridge...
Page 9
Installation 1. See below diagram, for proper placement of ductwork and electrical cutout in cabinet. In the case of Recycling Type, the processing of the vertical duct access hole is unnecessary. Cutout for power cord Cutout for ventilation Front face of cabinet 2.
Page 10
Installation Remove an inner panel by loosing 4 or 6 screws. 3. Referring to “Installation Diagram”, insert 4 wooden screws into a bottom plate of the cabinet. Marking is recommended before screw. About 5mm between the bottom plate and screwheads for hanging the hood body.
Installation (Ventilating Type) 8. Make the exhaust port secure and air-tight using non-flammable tape Flexible duct such as aluminium tape, etc. (not supplied) Operating Method Taping with non-flammable materials (Aluminium tape etc.) .Touch " " once to power up, then touch " "...
Points to Note on Maintenance This product should be maintained regularly for optimal performance and to prolong its usage lifespan. Warning o ensure safety, unplug the unit from the power source before maintenance. (2) Never allow the motor and electrical parts to get wet! (3) Do not leave the stove on when not in use or flaming.
Page 13
(12) range hood is intended to be installed over a hob with up to four hob elements or burners no more than total 5 2kW. Maintenance 1. Hood surface cleaning After each use wipe the range hood’s external surface with a soft cloth. 2.
Self-check In the event of any uncertainties or questions regarding repairs please consult the shop where you purchased this product Please stop using cooker cooker hood if it is not functioning normally hood must not be dismantled or repaired by an untrained service technician Defect Possible cause Solution...
Service and Parts When requesting repair: If any abnormality occurs while the cooker hood is in operation switch off the cooker hood to run, check the following points, disconnect the power plug from the receptacle and consult the shop from which you have purchased your cooker hood.
Page 16
Global website www.fujioh.com Southeast Asia Regional Headquarters FUJIOH INTERNATIONAL TRADING PTE.LTD. 130 Joo Seng Road #05-05 Singapore 368357 Tel: (65) 6286 3286 Fax: (65) 6285 3285 E-mail: fit@fujioh.com.sg...
Need help?
Do you have a question about the SLM-600 and is the answer not in the manual?
Questions and answers