Table of Contents
Advertisement
3 Prepare
1
Open the battery compartment.
2
Insert AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Position the WAC7500
Caution
•
Risk of product damage! Place the WAC7500 on a
surface that is level, flat, and strong enough to support
the WAC7500.
Connect to AC power
Warning
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the WAC7500.
1
Connect the WAC7500 to the power
supply
Your WAC7500 turns on and is ready
»
to be set up for use.
wac7500_um_01eng.indd 10
Note
•
The type plate information is located at the back or at
the underside of the WAC7500.
Turn on / switch to standby
You can select from the following status options:
•
On
•
Standby
•
Active standby. The button on
the remote control can turn on the
WAC7500.
•
Eco standby
•
Passive standby. Only the button
on the top panel can turn on the
WAC7500.
Note
•
If no buttons are pressed for 0 minutes, the WAC7500
switches to standby.
1
To turn on the WAC7500, press .
2
To switch the WAC7500 to standby, press
.
3
To switch the WAC7500 to eco standby,
press and hold the button on the top
panel.
Note
•
When the WAC7500 is in eco standby mode, the
remote control is inactive.
EN
10
14-08-08 16:29:41
Hide quick links:
Advertisement
Table of Contents
