1-2-11. Optical Block (G) Assy and S Board Removal
* To remove the optical block (G) assy and S board, remove the C board beforehand.
3 Five screws
4 Optical block (G) assy
1-2-12. DC Fan Removal
* To remove the DC fan, remove the C board beforehand.
1-8
1 Two screws
(+PWH 3x8)
2 Connector (2P)
(+PS 4x12)
Connector
Connector (4P)
4 Two screws
(+PSW 3x25)
1 Three screws
(+PSW 4x10)
2 Lamp duct (bottom)
Connector (4P)
CN2400
Four claws
3 Lamp duct (top)
5 DC fan
Connector (3P)
5 Screw
(+PSW 4x10)
6 S board
VPL-FX52/FX52L