Related Manuals for M2M C350 pro
Summary of Contents for M2M C350 pro
- Page 1 Technical Manual 1.02, C350 Professional Technical Manual for the C350 pro Version 1.02...
-
Page 2: Introduction
GSM network and capable of waking up on for example GSM activity, change of digital inputs and many other events. These features open up for the use of the C350 pro in exciting new application areas where extremely low power consumption and flexible wake-up conditions are a crucial parameter for successful product integration. -
Page 3: Table Of Contents
Technical Manual 1.02, C350 Professional Table of Contents Introduction ..........................2 Table of Contents ........................3 Graphical view ........................4 External connections ......................5 Overview ..........................5 Power supply........................10 Digital I/O ........................11 Digital outputs......................11 Digital inputs / S0 inputs / wakeup (ignition) input ............12 Analog I/O ........................14 Analog inputs......................14 Analog outputs......................15 RS232 communication ports (EIA/TIA-232 and V.28/V.24 compatible) ......16... -
Page 4: Graphical View
Technical Manual 1.02, C350 Professional Graphical view Page 4 of 38 M 2 M C o n t r o l Ph: +49.40.69647-260 by Infranet Technologies GmbH Tempowerkring 2 Fax: +49.40.69647-259 21079 Hamburg Email: info@m2mcontrol.de Germany Web: www.m2mcontrol.de... -
Page 5: External Connections
The LCD also has icons for battery level/charging-in-progress and GSM network status. Eight pushbuttons are available for the user to interact with on the C350 pro unit. Also present are four user controlled and two system LED’s for simple information and status. - Page 6 Technical Manual 1.02, C350 Professional The bottom side of the C350 unit has all the communication interfaces; CAN, 1-Wire, RS232 Port 1, RS232 Port 2, RS485 Port 1 and RS485 Port 2 (optional). These are all available on large and easy-to-use pluggable screw terminals or standardized connectors. Also available are SIM card reader with lock, 3.3VDC output for driving external accessories and equipment and all the analog inputs and outputs.
- Page 7 Technical Manual 1.02, C350 Professional Connector X1: 6-pin SER1 connector overview. Name Description Transmit data from serial port 1, RS232 compatible RS-DET Programming cable detect, normally unconnected (if programming cable, connect to SGND) DC-OUT +3.3V / 400mA DC-OUT for external equipment. Receive data for serial port 1, RS232 compatible SGND Signal ground...
- Page 8 Technical Manual 1.02, C350 Professional Pin 4 - 26 overview. Name Description CAN-H CAN-bus H-signal CAN-L CAN-bus L-signal SGND Signal ground 1Wire 1-Wire bus for ID-Button / Temperature sensor 1Wire-LED 1-Wire ID-Button LED SGND Signal ground RS485_1+ RS485 non-inverting signal for standard RS485 port RS485_1- RS485 inverting signal for standard RS485 port SGND...
- Page 9 Digital input 7 DIN8 Digital input 8 SGND Signal ground SGND Signal ground Accessories available from M2M Control for cable assembly. Order-code Name RT-O-TYCO-H6 Tyco, Connector house 6 pins. Bag with 10 pcs TYCO p/n: 794617-6 RT-O-TYCO-CR Tyco, Crimp Contacts for connector house. Wire size 0.2 to 0.5 TYCO p/n: 794606-1 .
-
Page 10: Power Supply
Control IDE on-line help for more information. The display will automatically turn off when external power is removed. When the wakeup/ignition input is activated with a logical high, the C350 pro unit will wake up if it was in power down mode. -
Page 11: Digital I/O
The digital outputs are supplied directly from the SUPP power pins, which also supplies the rest of the C350 unit. As the power is also the C350 pro main power, a power-fail would also affect the digital outputs. -
Page 12: Digital Inputs / S0 Inputs / Wakeup (Ignition) Input
Appendix A. S0 compliant inputs (IEC62053-31, Class B compatible) In S0 configuration the relevant C350 pro input will act as ‘pulse input device’ and a current is supplied into the input connector, so that a simple switch between SGND and the appropriate input will activate it. - Page 13 If the input is activated with a logical high or low (Wait For Event mode only) when the C350 pro is in low power mode it will wakeup the unit. A power apply will also wake the unit up if it is in power-down mode or in Wait For Event mode with power Apply and/or ignition selected for wakeup.
-
Page 14: Analog I/O
Technical Manual 1.02, C350 Professional Analog I/O The C350 pro unit has four analog inputs and four analog outputs. Both the inputs and the outputs have a resolution of 10bit and can individually be configured to either voltage or current input/output. -
Page 15: Analog Outputs
250Ω. Each output is ESD and transient protected. Please note: The C350 pro unit must be supplied with minimum 12VDC in order for the analog outputs to work according to specifications. -
Page 16: Rs232 Communication Ports (Eia/Tia-232 And V.28/V.24 Compatible)
Technical Manual 1.02, C350 Professional RS232 communication ports (EIA/TIA-232 and V.28/V.24 compatible) Two general purpose RS232 ports available on the C350 pro unit both are compliant with the EIA/TIA-232 standard. Serial port 1 cannot use handshaking, but on serial port 2 all control signals are present. -
Page 17: Serial Port 2
GSM modem. Using this mode will effectively 'hand over' the GSM module inside the C350 pro unit, so that it is exclusively controlled by any external device connected to serial port 2 on the unit. Please consult the M2M Control IDE on-line help for further information. -
Page 18: Rs485 Communication Ports (Eia/Tia-485-A Compatible)
Appendix A. RS485 port (standard) This port is always available on the C350 pro unit and is not shared with other resources. Standard RS485 port pins. Name... -
Page 19: Rs485 (Optional)
Technical Manual 1.02, C350 Professional RS485 (optional) If the optional RS485 port is installed and enabled, RS485 will be available on the pluggable screw terminals. Internally this RS485 port and the programming port share the same signals and RS485 will be disabled if a programming cable is inserted or RS-DET is low. -
Page 20: Can Communication Port
Especially in vehicles great precautions must be observed to prevent interruption of the communication. On the C350 pro unit writing capability on the CAN bus is enabled by default, this can be disabled by installing the hardware jumper JP5 inside the unit. -
Page 21: 1Wire
– allowing minimal cable installations. For 1-Wire ID-Button readers, which include a built-in LED, a dedicated output is available for this purpose. Please consult the M2M Control IDE on-line help for further information. 1-Wire pins. -
Page 22: Human User Interface
Technical Manual 1.02, C350 Professional Human user interface On the front of the C350 pro unit the human user interface is found, this includes a 144x32 easy-to-read graphical LCD, a small incorporated keypad and three bi-colored LED’s and one single color LED. -
Page 23: Keypad
Power state of the display is saved in persistent memory, and the state will be restored when power recycling or restarting the unit. Please consult the M2M Control IDE on-line manual for more information about the use of the display. -
Page 24: Led's
• LED named B on the front-plate, consists of LED 3 (green) and LED 4 (red) They are easily accessed from within the VPL program, and it is possible to mix the LED’s to obtain a third color, yellow. Please consult the M2M Control IDE on-line manual for more information. -
Page 25: Switches
Switches DIP-Switch The C350 pro unit contains four dipswitches, where three of them are available for the application to use (fourth dipswitch is reserved for future use.) The dipswitches is located on the top side of the unit for easy user access (see the graphical view). -
Page 26: Internal Li-Ion Battery
After 300 cycles the capacity has dropped to approximately 80% of the initial capacity. Warning: Misusing the C350 pro unit may cause the built-in battery security circuit to be damaged. • Do not place the unit in high temperature locations such as direct sunlight or near engines. -
Page 27: Gsm
• CSD (Datacall) SIM-Card The C350 pro unit contains a standard SIM card reader which is located on the bottom side of the unit (see the graphical view) and is easily accessed. The SIM card reader has a push/push eject system and a mechanical lock for secure installation of the SIM card. -
Page 28: Sd-Card
Technical Manual 1.02, C350 Professional SD-Card The C350 pro unit has a standard SD-CARD reader which is located on the top side of the unit (see graphical view) The C350 pro supports a FAT file-system for standard PC- compatibility. Up to 2 GByte capacity is supported. The SD-CARD features a push/push eject system for reliable insertion and operation. -
Page 29: Power Consumption
Detailed information on the maximum power consumption of the C350 pro unit in different states and different supply voltages is listed below. External supply When the C350 pro unit is powered from an external DC power source the power consumptions will be as follows. Maximum power consumption... -
Page 30: Technical Data
Technical Manual 1.02, C350 Professional Technical Data Page 30 of 38 M 2 M C o n t r o l Ph: +49.40.69647-260 by Infranet Technologies GmbH Tempowerkring 2 Fax: +49.40.69647-259 21079 Hamburg Email: info@m2mcontrol.de Germany Web: www.m2mcontrol.de... -
Page 31: Appendix A - Unit Configuration Guide
Technical Manual 1.02, C350 Professional Appendix A – Unit configuration guide The C350 has many features and some of them requires configuration by setting hardware jumpers inside the unit. The following figure shows the location of the jumpers when the lid is removed. Blue lined boxes show default state of the jumpers. - Page 32 Technical Manual 1.02, C350 Professional A number of jumpers enables/disables a feature while the others used to select between two features. A brief overview can be found on the following table. Feature Jumper State Default state Installed CAN bus write disabled Communication Not installed CAN bus write enabled (default)
- Page 33 Technical Manual 1.02, C350 Professional Enables/disables writing capabilities to the CAN bus, when the jumper is installed writing to the CAN bus is disabled. JP7, JP12 and JP15 Enables/disables on-board 120 ohm line termination resistors which are according to standards; CAN and RS485 communication required as proper line termination value (assuming a CAT5 twisted pair cable is used) resistors in both ends of the bus.
- Page 34 Technical Manual 1.02, C350 Professional Opening the lid 1. Place a screwdriver or a flat-tipped tool as shown in the picture, and lift the screwdriver handle upwards gently to unlock the lid. 2. Lift the lid carefully to the right, be aware of the cables at the left end don’t use force.
- Page 35 Technical Manual 1.02, C350 Professional 3. Rest the lid as in the following picture. The jumper locations are marked with red circles. Page 35 of 38 M 2 M C o n t r o l Ph: +49.40.69647-260 by Infranet Technologies GmbH Tempowerkring 2 Fax: +49.40.69647-259 21079 Hamburg...
- Page 36 Technical Manual 1.02, C350 Professional Closing the lid: 1. Begin with placing the left side of the lid into the tap of the bottom part, close the lid gently. 2. Make sure that the cables, especially the battery cable is placed correctly and not stuck with the add-on board.
-
Page 37: Appendix B - Installing The Sim-Card
Technical Manual 1.02, C350 Professional Appendix B – Installing the SIM-Card The SIM card reader has a push/push eject system and a mechanical lock for secure installation of the SIM card. Orientate the card as showed below, and insert it into the card reader. Push the card into the reader until a click sound occurs –... -
Page 38: Appendix C - Installing The Sd-Card
Technical Manual 1.02, C350 Professional Appendix C – Installing the SD-Card To insert a card into the reader orientate it as showed below, and push the card into the reader until a click sound occurs. Remove the card by pushing it into the reader until it clicks and the reader will eject the card.