Table of Contents
Advertisement
COLORband PiX™ Mini QRG
AC Power
Power Linking
Fuse
Replacement
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 20 COLORband PiX™ Mini units at 120 VAC and 35
units at 230 VAC. You should never exceed this number.
To replace the fuse in the COLORband PiX™ Mini, use the following steps:
1.
Disconnect this product from the power outlet.
2.
Wedge the tip of a flat head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing pulling out the installed fuse.
4.
Remove the blown fuse from the safety cap and replace with a fuse of
the exact same type and rating.
5.
Insert the fuse holder back in place and reconnect power.
Page 4 of 12
Advertisement
Table of Contents
