Slow; Microphone Mixing; Vocal; Key Control - Philips MCV250/21 User Manual

VIDEO CD

Slow

1
Press SLOW on the remote control to watch a
VCD at a slower speed. There are 4 types of
slow modes to select.
The sound is muted.
On TV screen, "SLOW 1/2", "SLOW 1/4",
"SLOW 1/8", SLOW 1/16 or PLAY is displayed.
2
To resume playback at normal speed, press É Å .

Microphone Mixing

Connect microphones (not supplied) to the
system to sing along with the music source.
1
Connect microphones to MIC jack.
Before connecting the microphone, set the
microphone level with VOL to the lower level to
prevent howling sound by turning the MIC VOL
knob.
2
Select VCD/CD to start playback.
Press ECHO to select MIC ON.
3
Adjust the volume level of the source with
VOLUME – /+ control.
4
Start singing or talking through the microphone.
5
Press KEY to select key tone if necessary.
Notes:
– Keep the microphones away from the speakers
to prevent howling.
– Microphone mixing only available in VCD mode.

Vocal

This feature allows you to fade out the original
vocal from a karaoke VCD. This feature is used
together with Echo mode. You can also use it to
select the different audio modes.
Pressing VOCAL on the remote control
repeatedly allows you to select the following
modes.
STEREO ™ VOCALL-VOCALL R ™ MONO
L ™ MONO R™ STEREO ...
VOCAL LEFT/RIGHT - fade out the original
vocal for specially recorded karaoke discs only
(press ECHO to select MIC ON)
STEREO – same effect as the original recorded
disc.
MONO L/R – select the language on a bilingual
VCD.
18
Ensure that the MIC mode is switched on
when pressing VOCAL to fade out the original
vocal during STEREO VOCAL L/R mode.

Key Control

This feature allows you to change the key tone
of your vocal range.
Press KEY on the remote control.
"-KEY SHIFT+" appears on the TV screen.
Press –/+ to decrease or increase the vocal key
level between -6 and +6.

Echo

This feature allows you to add echo while singing
or talking through a microphone.
Press ECHO on the remote control
"-ECHO DELAY+" appears on the TV screen.
Press VOLUME –/+ to decrease or increase
the echo level.