Code Length - CDVI SOLARKPW Installation Manual

INSTALLATION MANUAL
SOLARKPW-SOLARKPB
Dual Technology Digicode

Code Length

- The user code must be in 4, 5, 6, 7 or 8 digits,
- In direct mode, all the keypad keys can be
used to program a user code except the B key,
- In hexadecimal mode, all the keypad keys
can be used to program a user code
except the A and B key,
- Enter the user code and then B to validate
the code.
Programming
the audible signal
A5
1 beep
Green LED ON
Enter:
- 0 = disable the
keypad beeps
- 1 = Enable the
keypad beeps
1 beep = OK
Green LED ON
4 beeps = Error
/Proximity reader - Wiegand
®
Programming
Master code
A6
1 beep
Green LED ON
Enter:
Enter the new master
code (5 digits)
1 beep = OK
Green LED ON
4 beeps = Error
Enter the master code
twice (12345, default
value)
2 beeps are emitted
Red
LED ON
Programming
reading mode
1 beep
Green LED ON
Enter:
- 0 = Permanent
- 1 = Sleep mode
1 beep = OK
Green LED ON
4 beeps = Error
Press on B
B
twice to exit from
programming
2 beeps are emitted
cdvigroup.com
EN
A7
9