Operation Instructions; General Instructions; Control Buttons - Philips 227E3QSU/93 Service Manual

Meridian 3
8
3. Operating Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off.
The other control knobs are located at front panel of
the monitor. By changing these setting, the picture
can be adjusted to your personal preference.
﹡The power cord should be connected.
﹡ Press the power button to turn on the monitor.
The power indicator will light up.

3.2 Control Buttons

Operating the Monitor
Front view product description
1. : Switch monitor's power ON and OFF.
2. : Access the OSD menu/
3. ◄: Return to previous OSD level.
4. : Change to 4:3 display.
5. ▲/▼: Adjust the OSD menu.
6. : Change the signal input source.
7. : SmartImage Lite: There are three modes to be
selected: Standard, Internet and Game.
Connecting to your PC
1. AC power input
2. VGA input
3. DVI-D input
4. Kensington anti-thief lock
Connect to PC
1. Connect the power cord to the back of the monitor
firmly.
2. Turn off your computer and unplug its power cord.
3. Connect the monitor signal cable to the video
connector on the back of your computer.
4. Plug the power cord of your computer and your
monitor into a nearby outlet.
5. Turn on your computer and monitor. If the monitor
displays an image, installation is complete.
Install the base stand
1. Place the monitor face down on soft and smooth
surface taking care to avoid scratching or damaging
the screen.
2. Hold the base stand with both hands and firmly
insert the base stand into the base column.
1) Gently attach the base to the base column until
the latch locks the base.
2) Use your fingers to tighten the screw located at