Timing Requirement - Philips 227E3QSU/93 Service Manual

3.2.2 DVI Cable
The input signals are applied to the display through DVI-D cable.
Length
Connector type
Pin Assignment:
Pin
1
2
3
4
5
6
7
8
9
10
11
12

3.3 Timing Requirement

Factory Preset Mode Definition:
a. Perfect FOS while presenting those timings.
b. Will specify those timing in User's Manual
Preset Mode Definition
a. Need to support those timings
b. Perfect FOS after auto adjustment.
User Mode
a. Can save those timing that not in Preset mode and can be showed (not over scaler or Panel spec.)
b. It needs to reserve the 10 timings space in memory size.
3.3.1 Mode Storing Capacity
Factory preset modes
Preset modes
User modes
Timing pixel clock over H/W limitation do not support.
VGA Video timing: interlace modes do not support.
1. Factory preset modes and preset modes are defined in the enclosed timing table file
01. M3 Timing
table_20110506.xlsx
Video timing mode for DVI (internal firmware support)
60Hz: 480p/720p/1080i/1080p
50Hz: 576p/720p/1080i/1080p
: Please refer to M3 cable bundle summary file
: DVI-D male with DDC-2B pin assignments
White connector thumb-operated jackscrews
With transplant pin protective cover.
Signal Assignment
T.M.D.S. data2-
T.M.D.S. data2+
T.M.D.S. data2 shield
No Connect
No Connect
DDC clock
DDC data
No Connect
T.M.D.S. data1-
T.M.D.S. data1+
T.M.D.S. data1 shield
No Connect
: Refer to timing table
: Refer to timing table
: Refer to timing table
Pin Signal Assignment
13 No Connect
14 +5V Power
15 Ground (for +5V)
16 Hot plug detect
17 T.M.D.S. data0-
18 T.M.D.S. data0+
19 T.M.D.S. data0 shield
20 No Connect
21 No Connect
22 T.M.D.S clock shield
23 T.M.D.S. clock+
24 T.M.D.S. clock-
Meridian 3
71