Energywise Domain - Cisco Catalyst 3850 Command Reference Manual

energywise domain

energywise domain
To enable Cisco EnergyWise on a network device or endpoint, assign it to a domain, set the domain security
mode, and set the domain password, use the energywise domain global configuration command. To disable
EnergyWise and to remove the EnergyWise configuration, use the no form of this command.
energywise domain domain-name security {ntp-shared-secret| shared-secret} [0| 7] domain-password
[protocol udp port udp-port-number | [interface interface-id| ip ip-address]]
no energywise domain
Syntax Description
domain-name
security
ntp-shared-secret
shared-secret
0 | 7
domain-password
Cisco EnergyWise Cisco IOS Command Reference for Catalyst 3850 Switches, EnergyWise Version 2.8
14
The domain name assigned to a network device or
endpoint.
• You can enter alphanumeric characters and symbols,
such as #, (, $, !, and &.
• Do not enter an asterisk (*) or a space between the
characters or symbols.
Sets the domain security mode and the domain password
to authenticate all communication in the domain.
Uses a strong password with Network Time Protocol
(NTP). If the time between members varies ±30 seconds
the domain member or endpoint drops events.
Sets a strong domain password without NTP.
Uses a password for secure communication with the
connected domain member. you can specify these values:
• (Optional) 0—Uses a plain-text password.
• (Optional) 7—Uses a hidden password.
If you do not enter 0 or 7, the default is 0.
Plain-text password.
• You can enter alphanumeric characters and symbols
such as #, (, $, !, and &.
• Do not enter an asterisk (*) or a space between the
characters or symbols.
EnergyWise Commands
OL-32343-01