Cisco Catalyst 3850 Command Reference Manual page 17

EnergyWise Commands
Examples
This example shows how to enable EnergyWise, assign an IP phone to a domain, and set the domain and
management passwords:
DomainMember# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
DomainMember(config)# energywise domain cisco security shared-secret cisco protocol udp
port 43440 ip 2.2.4.30
DomainMember(config)# energywise importance 50
DomainMember(config)# energywise keywords lab1,devlab
DomainMember(config)# service password-encryption
DomainMember(config)# energywise management security shared-secret 7 cisco port 60500
DomainMember(config)# energywise name Device01
DomainMember(config)# energywise neighbor member-21 43440
DomainMember(config)# energywise role role.labaccess
DomainMember(config)# energywise allow query save
DomainMember(config)# end
Related Commands
Command
show energywise, on page 22
OL-32343-01
Cisco EnergyWise Cisco IOS Command Reference for Catalyst 3850 Switches, EnergyWise Version 2.8
energywise (global configuration)
Description
Displays the EnergyWise settings and status.
9