Maintenance; Optional Accessories - Makita DCL182 Instruction Manual

Fig.29

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off before
•
attempting to perform inspection or maintenance.
After use
NOTE:
Putting the cleaner against the wall without any
•
other support cause the cleaner to fall down and
be damaged.
Fig.30
Cleaning
Fig.31
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/dust pack
mounting area and the dust stopper.
CAUTION:
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
Symptom
Weak suction
power
Not working
011566
NOTE:
Do not attempt to repair cleaner by yourself.
•
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita cleaner
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
Area to be investigated
Is dust bag or paper pack full of dust ?
Is dust bag clogged ?
Is paper pack clogged ?
Is battery cartridge exhausted ?
Is battery cartridge exhausted ?
or attachments
Only use accessory or
Fig.32
Wash the dust bag in soapy water when it is clogged
with dust and the cleaner power becomes small. Dry it
out thoroughly before use. An insufficiently dried bag
may cause poor suction and shorten the service life of
the motor.
NOTE:
Dust pack is a throw-away type.
•
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.
Removing and installing the sponge filter
Fig.33
To remove the sponge filter, remove the dust bag or dust
pack and then pinch and take it out.
Fig.34
Press in the whole edge of the sponge filter against the
recessed wall inside the dust bag/dust pack mounting
area.
CAUTION:
After cleaning sponge filter, be sure to install it on
•
the cleaner. If washed in water, dry it up before
installing. An insufficiently dried sponge filter may
shorten the service life of the motor.
Things to Check Before Asking for Repairs
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Extension wand (Straight pipe)
•
Nozzle
•
Nozzle for carpet
•
Shelf brush
•
Corner nozzle
•
Round brush
•
Flexible hose
•
Paper pack
•
Makita genuine battery and charger
•
are
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
9
Fixing method
Empty dust bag or paper pack.
Dust down or wash the dust
bag.
Replace paper pack.
Charge the battery cartridge.
Charge the battery cartridge.