Basic Functions; Switching The System On; Power-Saving Automatic Standby; Adjusting Volume And Sound - Philips MC150/21 User Manual

IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

● Press STANDBY-ON (y on the remote
control) or SOURCE.
➜ The system will switch to the last selected
source.
● Press SOURCE (CD, TUNER or TAPE on
the remote control).
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press STANDBY-ON (y on the remote
control).
● If in tape mode or recording mode, press
STOP•OPEN first.
➜ The volume level (up to maximum volume
level of 20), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.

Power-saving automatic standby

The power-saving feature automatically switches
to standby 15 minutes after a tape or CD
playback has ended and no control is operated.

Basic Functions

Adjusting volume and sound

Press VOLUME 3 / 4 (VOL 3 / 4 on the
1
remote control) to increase or decrease volume.
➜ Display shows the volume level Uo and a
number from 0-32.
2
Press DBB 1 or DBB 2 (DBB on the remote
control) to switch bass enhancement on or off.
➜ Display shows:
activated.
3
Press MUTE on the remote
control to stop sound play-
back instantly.
➜ Playback will continue
without sound and the display
shows .
● To start sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.
or if the DBB is
11