Warning And Precautions - M-Life ML0674 Owner's Manual

If the device doesn't
work well, try the
following methods
After modifying SSID
name/ password,
cannot connect
automatically

WARNING AND PRECAUTIONS

• Electronic Device
Turn off your device near high-precision electronic devices. The wireless device may affect
the performance of these devices. Such devices include hearing aids, pacemakers, fire alarm
system, automatic gates, and other automatic devices can be affected. If you are using an
electronic medical device, consult the device manufacturer to confirm whether the radio wave
affects the operation of this device.
• Hospital
Pay attention to the following points in hospitals or health care facilities:
Do not take your wireless device into the operating room, intensive care unit, or coronary
»
care unit.
Do not use your wireless device at places for medical treatment where wireless device use
»
EN
is prohibited.
• Storage Environment
Do not place magnetic storage media such as magnetic cards and floppy disks near the wireless
device. Radiation from the wireless device may erase the information stored on them.
Do not put your wireless device and other accessories in containers with strong magnetic
»
field, such as an induction cooker and a microwave oven. Otherwise, circuit failure, fire, or
explosion may occur.
Do not leave your wireless device in a very hot or cold place. Otherwise, malfunction of the
»
products, fire, or explosion may occur.
Do not subject your wireless device to serious collision or shock. Otherwise, wireless device
»
malfunction, overheat, fire, or explosion may occur.
• Children Safety
Put your wireless device in places beyond the reach of children. Do not allow children to use
the wireless device without guidance.
Owner's manual
• check battery level
• restart the device
• restore factory setting
After modifying SSID name/ password, the external device will still
try to connect to the previously SSID name/with previous password.
Please delete the current SSID name that failed to connect, and
again search for correct SSID and input correct password to connect.
- 22 -