Connect To Your Device - M-Life ML0674 Owner's Manual

CHARGING
You can either charge this device with the use of AC charger or by connecting it to computer.
TUM ON/OFF
1. To turn the device on, press and hold the power switch for about 3 seconds until display
lights up and shows "Welcome".
2. To turn it off, press and hold the power switch for about 3 seconds until display shows
„Goodbye".

CONNECT TO YOUR DEVICE

• Via USB
1. Use an USB cable to connect the router to your device.
2. Turn on the router.
3. Your device will automatically detect the router, and display installation window. Carry out
the installation according to system prompts.
4. Establish a Wi-Fi connection: search for available wireless connections on your computer
or other device.
5. When you find the router's SSID in the Wi-Fi list, click "connect" to connect your device to
the internet.
6. Enter the WiFi key when prompted for a security key.
EN
7. Open browser and enter the IP address http://192.168.0.1 into address bar. Then input login
password (default: admin).
8. Once you are in UI, go to Setup → Quick Setup, and enter proper password (default:
88888888).
Note: The device connected through the USB to the router is not included in the total number
of access users.
If the system does not support automatic installation, please run DriverSetup.exe program in
My Computer → CD-ROM drive to start software installation.
• Via Wi-Fi
1. Turn on the device, wait for 1~2 minutes till the device initialization is completed.
2. Make sure the SIM card has balance,
3. Establish a Wi-Fi connection: search for available wireless connections on your computer
or other device.
4. When you find the router's SSID in the Wi-Fi list, click "connect" to connect your device to
the internet.
Owner's manual
- 18 -