Ssid And Password; Web Configuration - M-Life ML0674 Owner's Manual

5. Enter the WiFi key when prompted for a security key.
6. Open browser and enter the IP address http://192.168.0.1 into address bar. Then input login
password (default: admin).
7. Once you are in UI, go to Setup → Quick Setup, and enter proper password (default: 88888888).
Hint: Make sure you have enabled two functions: Obtain an IP Address Automatically and
Obtain DNS Server Address Automatically (Network settings in Control Panel).
• Via WPS Function
This router can be connected via WPS function, only if the device supports WPS feature. To
connect the two device with the use of WPS follow the below instructions:
1. Turn on the router as well as your device. Turn on Wi-Fi on your device.
2. Press and hold WPS button on the router to activate the function. The screen will display
countdown timer that counts down how much time is left before the function turns off.
3. Turn on WPS function on your other device.
4. The screen on your other device will prompt about connection completion.
Note: WPS function will automatically shut down after 2 minutes. Please press the WPS button
again to turn on the function once more.

SSID AND PASSWORD

The user can obtain the SSID and password as bellow:
1. nvia Web: Enter the Web UI: Setup → Quick setup → Basic setting. The SSID and password
will be displayed on the screen.
2. Double click the device WPS button, you can see the information of SSID and Key on the LCD.
Note: The SSID input requirements: no longer than 32 digits (Latin alphabet, numbers, strike,
and underline).
The password input requirements: 8-63 ASCII or 8-64 hexadecimal digits (Latin alphabet,
numbers, strike, and underline).

WEB CONFIGURATION

Open browser and enter the IP address http://192.168.0.1 or http://mfi.home/ into address bar.
Then input login and password (default: admin). IP address and login password are printed on
a plate beneath the router's battery).
Owner's manual
- 19 -
EN