Common Operations - Axis DVR5 Instruction Manual

COMMON OPERATIONS

6. Fault Handling
2. Format the memory card.
3. Do not set other functions except for the time.
4. Record the video again.
COMMON OPERATIONS
Date and Time Setting
2. Double press "M" button to enter video setup menu.
3. Choose "Date and Time" option by pressing "up" and "down" button.
4. Press "0" button once to enter into "Date and Time" settings.
5. Press "up" and "down" button to set numbers.
6. Press the "0" button once to set the next number.
7. After setting up, press "M" button to exit.
Format the Memory Card
1. In the standby state of video mode (If it is at recording status, please stop it by
2. Double press "M" button to enter the setup menu.
3. Choose "Format" by pressing "up" and "down" buttons.
Restart and Reset
Restore Defaults
1.
2. Double press "M" button to enter the setup menu.
3. Choose "Default Setting" by pressing "up" and "down" buttons.
Note: When this function is on, the data recorder does not need an external power
supply. It will automatically start to record for 30 seconds and then automatically shut
down.
1. Enter standby state of video mode (If set to recording, please stop by pressing
2. Press "M" button once to enter the setup menu.
3. Choose "Parking Monitoring" option by pressing "up" and "down" buttons.
4. Press "0" button to enter the submenu.
5. Choose the sensitive option of "High" "Medium" "Low" by pressing "up" and "down"
buttons. Press "0" to save and press "M" to exit.
4