Table of Contents
Advertisement
• BD-Live Setting
You can limit the Internet access from the BD-Live
functions. (The default setting is "Allow".)
1) Follow steps 1) to 5) in "Connection Test" on page
44.
2) Use [K / L] to highlight "Enable(Custom)", then
press [OK].
3) Use [K / L] to highlight "BD-Live Setting", then
press [OK].
4) Use [K / L] to highlight the desired setting, then
press [OK].
"Allow":
Internet access is permitted from all BD-Live contents.
"Limited Allow":
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates are prohibited.
"Prohibit":
Internet access is prohibited from all BD-Live contents.
5) Press [BACK
] to go back to the previous screen,
or press [HOME
] to go back to the home menu.
• Network Status
You can check the status of network settings.
1) Follow steps 1) to 5) in "Connection Test" on page
44.
2) Use [K / L] to highlight "Enable(Custom)", then
press [OK].
3) Use [K / L] to highlight "Network Status", then
press [OK].
• Network setting list will be displayed.
4) Press [BACK
] to go back to the previous screen,
or press [HOME
] to go back to the home menu.
Disable
"Play Disc
HOME
"Custom"
Setup"
Deactivate all the network connection and settings.
1) Follow steps 1) to 5) in "Connection Test" on page
44.
2) Use [K / L] to highlight "Disable", then press [OK].
3) Use [K / L] to highlight "Yes", then press [OK].
4) Press [BACK
] to go back to the previous screen,
or press [HOME
] to go back to the home menu.
Note
• The network connection can be reactivated by
setting the network connection to "Enable(Easy)" or
"Enable(Custom)".
SETUPS
"Network
"Other"
"Disable"
Connection"
Software Upgrade
Disc Upgrade
"Play Disc
HOME
"Custom"
Setup"
You can upgrade the software by using disc.
1) Follow steps 1) to 4) in "Connection Test" on page
44.
2) Use [K / L] to highlight "Software Upgrade", then
press [OK].
3) Use [K / L] to highlight "Disc Upgrade", then press
[OK].
4) Use [K / L] to highlight "Yes", then press [OK].
5) Disc tray will open automatically.
• Insert the disc for software upgrade and then press
[OPEN/CLOSE A].
6) After completing loading disc, confirmation
message will appear. Use [s / B] to highlight "Yes"
and press [OK] to start upgrading.
• It may take a while to complete the upgrading.
7) After the disc upgrade finishes, this unit will restart
and open the disc tray automatically. Remove the
disc.
Note
• Please visit www.philips.com/support to download
the latest firmware version.
• Please do not unplug the AC power code while
executing the "Disc Upgrade".
• All settings will remain the same even if you upgrade
the firmware version.
"Software
"Disc
"Other"
Upgrade"
Upgrade"
EN
47
Hide quick links:
Advertisement
Table of Contents
