Network Connection - Philips HTS5100B User Manual

3) After entering the password, "Rating Level"
appears. (If not, use [K / L] to highlight "Rating
Level".) Select desired rating level then press [OK].
Rating Level
Password Change
All • Parental Control is inactive; all discs
can playback.
8 [Adult] • DVD software of any grades (adult/
general/children) can be played
back.
7 [NC-17] • No one under 17 admitted.
6 [R] • Restricted; under 17 requires
accompanying parent or adult
guardian.
5 [PGR] • Parental Guidance Recommended.
4 [PG-13] • Unsuitable for children under 13.
3 [PG] • Parental Guidance suggested.
2 [G] • General Audience.
1 [Kid Safe] • Suitable for children.
To cancel parental lock temporarily
Some discs allow you to cancel the parental lock
temporarily. With those discs, the message below will
appear when you try to play them back.
"Enter current password."
Follow the instruction which appears on the screen to
cancel the parental lock. After entering the password,
"Rating Level" appears.
Select desired rating level, then press [OK].
44 EN
All
8 [Adult]
7 [NC-17]
6 [R]
5 [PGR]
4 [PG-13]
3 [PG]
2 [G]
RATING EXPLANATIONS
SETUPS

Network Connection

Set up the network connection settings in order to use the
BD-Live function with a BD-Live disc.
Connection Test
"Play Disc
HOME
Setup"
After you made IP address/DNS settings or when a LAN
cable is connected, always perform the connection test to
check if the connection is correctly made.
1) Use [K / L] to highlight "Settings" in the home
menu, then press [OK].
2) Use [K / L] to highlight "Play Disc Setup", then
press [OK].
3) Use [K / L] to highlight "Custom", then press [OK].
4) Use [K / L] to highlight "Other", then press [OK].
5) Use [K / L] to highlight "Network Connection", then
press [OK].
6) Use [K / L] to highlight "Connection Test", then
press [OK].
Connection test will start automatically and the test result
will appear right after the connection test finishes.
• "Testing... " : The test is in progress.
• "Pass" : Connection test is successfully completed.
• "Fail" : Connection test failed. Check the connection
settings.
Press [OK] to go to the list of network status confirmation
screen.
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
7) Press [OK] to go back to the previous screen, or
press [HOME
Note
• If the connection test passes, you can enjoy the BD-
Live functions using the Internet without making any
extra settings.
• If the connection test fails, you may need to change
the MAC address settings of your router. You can
check the MAC address of this unit on "Network
Status" screen. (refer to page 47).
"Network
"Custom" "Other"
Connection"
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
then press 'OK'.
] to go back to the home menu.
"Connection
Test"