Table of Contents
Advertisement
Improving the image for progressive scan
video output setting
This feature is only applicable when you have
connected this system to a Progressive Scan TV
system through the Component Video jacks.
TV SHAPE
TV SYSTEM
PROGRESSIVE
SCR SAVER
PROGRESSIVE NOW OFF
Off
Select this if a conventional TV set is connected
to your system.
On
To enjoy the full quality potential offered by
progressive scan feature, a progressive scan TV
set is required.
You can press and hold OPEN/CLOSE on the
panel and 1 on the remote control for more
than 5 seconds to exit progressive scan .
Notes:
- A progressive scan TV set is required.
- The progressive scan video quality is only
possible through PR PB Y output connection.
Setting the screen saver
TV SHAPE
TV SYSTEM
PROGRESSIVE
SCR SAVER
SCREEN SAVER NOW ON
If set to ON, the screen saver will be activated
when you leave the system in stop or pause
mode for 5 minutes. The default setting is ON.
PBC
OFF
ON
PBC
OFF
ON
DVD Menu Operations
Night mode - turning on/off
NIGHT MODE
TEST TONE
NIGHT MODE SET TO ON
Off
Select this when you want to enjoy the sound
with its full dynamic range.
On
Select this to level out the volume. High volume
output will be softened and low volume output
will be brought upward to an audible level. This
feature is only available for movies with Dolby
Digital mode.
Test Tone
NIGHT MODE
TEST TONE
LEFT
AUTO
Select this item and the system will start testing
the speaker from left, right, surround cyclically
until you exit tone test.
-You can adjust speakers level when you testing
the speaker.
-The availability of the various channels test
depends on the number of speakers connected.
Notes:
– You can press 1 to exit test tone mode at
any time.
– Main volume can be adjusted during tone test.
PBC
OFF
ON
PBC
AUTO
29
Advertisement
Table of Contents
