Image Is Not Clear - Nvidia 3D Vision PRO User Manual

37
06
nVIDIa 3D VIsIon UseR GUIDe
> If you are charging the wireless glasses by connecting them to
>
your PC using a Usb cable, make sure your PC does not go into
power save mode. When your PC goes into power save mode,
the wireless glasses are no longer charging. To fix this, disable
any power saving options on your PC under the Windows Control
Panel. alternatively, you can use a Usb wall charging device to
charge the glasses directly from your wall power outlet without
connecting to the PC.
> Make sure you have used the DVI cable that was shipped with
>
your 3D Ready 120Hz LCD display. This is a dual-link cable and
3D Vision will not operate without it.

Image is not Clear

Your Eyes are not Adjusted
Your eyes may take some time to adjust to viewing stereoscopic 3D
effects. If you are new to gaming, make sure you start your depth
amount at the default of 15%. as your eyes adjust, you can increase
the depth amount.
Depth Needs Adjusting
adjust depth amount using the slider on the nVIDIa Control Panel
Setup screen. If you are in a game, use the thumb wheel on the
back of the Hub or the shortcut keys Ctrl+F3 to decrease depth and
Ctrl+F4 to increase depth.
Excessive Flickering
flicker in your peripheral vision can be caused by differences in
frequencies at which 3D Vision operates and the lighting in your
room. This type of flicker can be avoided by turning off the lights or
changing the stereoscopic 3D refresh rate. To see the refresh rates,
run the setup Wizard from the nVIDIa Control Panel. When
you get to the page asking about flicker, select Yes. You can then
select from the following refresh rates:
> 120 Hz refresh rate for use in north america when lights are on
>
> 110 Hz refresh rate for daytime and when lights are off
>
> 100 Hz refresh rate for countries with 50 Hz lighting and when
>
lights are on
once you have selected a refresh rate on the Setup Wizard screen,
click the Test with this refresh rate button to verify the new refresh
rate helps to reduce flicker. once you have found the best setting,
select Next to continue (see step 17 on page 18 for the procedure on
how to reset the refresh rate).