Pairing With The Buttons - Nvidia 3D Vision PRO User Manual

nVIDIa ConTRol Panel

Pairing with the Buttons

Press and Relase the button on the Hub
1.
The light on the hub will start alternating between green and cyan
Press and hold the button on the glasses until the light next to
2.
the button blinks green
Holding the button on the glasses until it blinks green, and then
releasing the button, places the glasses into their pairing mode.
Light on the glasses will turn solid green, and hub will return to
3.
solid green
Pairing is usually a very quick operation and the light on the
glasses will turn solid green when paired. If a stereo application is
running the glasses will start operating as well.
Note: adding glasses with the button also adds the glasses to the
control panel. If you wish to pair many glasses at once, press the
button on the hub twice, then pair the glasses. Glasses paired
this way will not appear in the control panel but will operate.
press and release
21