Air Transfer System TABLE OF CONTENTS Symbol Reference ............2 Intended Use and Precautions ........2 Part Identification - HoverMatt® Air Transfer Mattress ..3 Part Identification - HT-Air® 1200 Air Supply ....3 User Manual HT-Air® 1200 Air Supply Keypad Functions.....3 Air200G/Air400G Air Supplies ........3 Instructions for Use .............4-5...
• Route the power cord in a manner to ensure freedom from hazard. • Avoid blocking the air intakes of the air supply. • When using the HoverMatt in the MRI environment, a 25 ft. specialty MRI hose is required (available for purchase).
HoverMatts and HoverSlings and 32" & 39" HoverJacks. Air200G/Air400G Air Supplies If using HoverTech’s Air200G or Air400G Air Supplies, press the grey button on the top of the canister to initiate air flow. Press the button again to stop air flow.
5. Ensure that transfer surfaces are as close as possible and lock all wheels. NOTE: When using the 50” HoverMatt, two air supplies may be used for inflation. 6. If possible, transfer from a higher surface to a lower surface.
Page 5
7. If possible, transfer from a higher surface to a lower surface. 8. Turn on HoverTech Air Supply. 9. Push HoverMatt at an angle, either headfirst or feetfirst. Once half-way across, opposite caregiver should grasp closest handles and pull to desired location.
User Manual Product Specifications/Required Accessories HOVERMATT® AIR TRANSFER MATTRESS HOVERMATT® SINGLE-PATIENT USE (REUSABLE) AIR TRANSFER MATTRESS Heat-Sealed: Nylon twill Top: Non-woven polypropylene fiber Material: Material: Double-Coated: Nylon twill with silica polyurethane Bottom: Nylon twill coating on patient side Construction: Sewn...
OPTION 2 Place the HoverMatt on the Pre-Op stretcher or bed prior to patient arrival. Prior to patient arrival, place the HoverMatt on the OR table and tuck the Have patient ambulate onto bed/stretcher or use a HoverMatt to perform a edges under the OR table pad.
User Manual Warranty Statement The reusable HoverMatt is warranted to be free from defects in materials This warranty does not cover normal “wear and tear.” Component parts, and workmanship for (1) one year. Warranty begins on date of in-service particularly any optional equipment, valve caps, their attachments and by a HoverTech International representative or shipment date.
Need help?
Do you have a question about the hovermatt and is the answer not in the manual?
Questions and answers