GS-ST590V Rack Mount Server
Floppy disk controller
Enabled
Disabled
Floppy Check
Enabled
Disabled
P a r a l l e l ATA
Disabled
Both
Channel 0
Channel1
S e r ia l ATA
Enabled
Disabled
Native Mode Operation
This option allows user to set the native mode for ATA function.
Note that certain OS is not supported under Native Mode.
Auto
Auto detected. (Default value)
Serial ATA
Set Native mode to Serial ATA.
Parallel ATA
Set Native mode to Parallel ATA.
Enable the floppy disk controller. (Default value)
Disable the device.
Enable the device to verify floppy typer when system boot.
Disable the this function. (Default value)
Disable the device.
Select both Channel 0 and Channel 1 as Parallel ATA.
(Default value)
Select both Channel 0 as Parallel ATA.
Select both Channel 1 as Parallel ATA.
Enable Serial ATA device. (Default value)
Disable the Serial ATA.
4 2