Docomo F-04J Quick Instruction Manual page 9

◆ Handling docomo nano UIM card
CAUTION
Be careful of the cut surface when removing
docomo nano UIM card.
Do
May cause injuries.
◆ Handling mobile phones near
electronic medical equipment
WARNING
Wearers of medical equipment such as
implanted pacemakers or defibrillators must
Do
carry and use the terminal at least 15 cm away
from the implanted device.
The terminal's signals may affect the performance of
electronic medical equipment.
When electronic medical equipment other than
implanted pacemakers or defibrillators are in use
Do
outside of medical facilities (such as in home care
settings), check with the device manufacturer to
determine how the device is affected by
electrical signals.
The terminal's signals may affect the performance of
electronic medical equipment.
When you are in a crowd etc. and you have
difficulties to keep a distance of 15 cm or more
Do
from others, turn the airplane mode on or power
off the terminal not to transmit signals.
There may be wearers of medical equipment such as
implanted pacemakers or defibrillators around you.
The terminal's signals may affect the performance of
electronic medical equipment.
When using the terminal in a medical facility, be
sure to observe the regulations of the facility.
Do
◆ Material list
Part
Display panel
Exterior case Front case
Back case
Back cover
Receiver panel
Home key
1Seg antenna Top section
Pipe section
Root flexure
section
Root rotating
section
Out-camera/ Panel
Infrared data port
Power key, Volume key
One-touch buzzer switch
External connection jack cap
Charging jack
Battery Pack F35 Body
Contacts
Label
Desktop Holder Upper and
F46 lower case
Spacer (L/R),
Front hook,
Side lever,
Charging
terminal (lever)
Charging
terminal
(Contacts)
Rubber part
External
connection jack
7
Material/Surface
treatment
Hardened glass
PA-GF resin/Acrylic
UV curable coating
PC+ABS-GF resin/
Acrylic UV curable
coating
PC-GF resin＋
polyester elastomer
resin/Acrylic UV
curable coating
ABS resin/
Discontinuous
evaporated
PC resin/
Discontinuous
evaporated+Serigraph
PC+ABS resin
Stainless steel
Nickel titanium alloy
Stainless steel/Nickel
plating
Acrylate resin
Aluminum alloy/
Alumite coating
POM resin
PC resin＋polyester
elastomer resin/Acrylic
UV curable coating
PC resin＋ABS resin/
Gold plating
PC resin
Beryllium copper/
Gold plating
PET/Black print letter
ABS resin
POM resin
Phosphor/Gold
plating
Polyurethane
Stainless steel/Tin
plating
Contents/Precautions