How To Operate The 161 As A Data Server; How To Query Serial Number And Version; How To Perform A System Update - Burmester 161 Owner's Manual

Table of Contents

Advertisement

hOw tO OperAte the 161 As A DAtA server?

How to operate the 161 as a Data Server?
In server mode, the device functions as a pure data server . Access to the hard disk and
streaming of data, for example for multi-room playback, is available while all other
functions are de-activated . This operating mode uses much less power than normal
operation .
Server mode can be activated via the iPad® app in the Settings > Power menu or using
the web interface in the setup menu under System > Settings > General .
Please see the operating instructions " Instructions for Operation via the iPad® App" and
"Instructions for Operation via a Web Browser" for further information .

How to query Serial Number and Version?

You can query the serial number and software and firmware version of your device by
using the remote control:
Press the OSD button the remote control, then press 2 – 2 – 2 .
The serial number (SNR), software version (VERS), and firmware version (FW)
ª
of your device appear in sequence on the display .

How to perform a System Update?

You can update the software on your 161 online or via a USB stick .
Updating online
The online update is started via the web interface or via the iPad® . Please see the
separate documents for more detailed information .
note:
For
online updates the installation files are downloaded to your device from the
Burmester
Updating via a USB stick
1.
Save the current software on a USB stick . You can obtain the current software from
your specialist dealer .
2.
Plug the stick into the USB slot on the front panel or into one of the slots on the rear
panel of the Phase 3 .
3.
On the remote control, press the OSD button, then the buttons 2 – 5 – 8 .
The LEDs on the left side of the device panel light up red .
ª
4.
Press the OK button on the remote control .
The update starts .
ª
The LEDs flash and the display shows "Firmware Update in progress" .
ª
ª
After the update has been completed the device reboots .
32
server . You need an Internet connection with sufficient
bandwidth .

Advertisement

Table of Contents
loading

Table of Contents