About this guide About this guide This short operating guide will show you how to start using your 111 Musiccenter in just a few quick and easy steps. It does not replace the full operating instructions for the device itself and for the iPad. You will find a description of all the functions (such as operation over a network) and detailed information on operation using an iPad in the full instructions.
Unbalanced cables can be connected using the XLR-RCA adapters supplied with the device. Connecting digital signal sources ► Connect electrical digital signal sources such as a CD player to input 4/6/8. ► Connect optical digital signal sources such as a DAB tuner to input 5/7/9. 111 Musiccenter...
ConneCting up Connecting a power amplifier ► For the best sound, connect the inputs of your power amplifier to the bALAnCed sockets using a balanced LF cable. ► Use the unbAL outputs and a Cinch cable if your power amplifier only has unbalanced Cinch inputs.
Page 5
► Press the poweR switch down into the off position. After the system powers down the device switches off. You will not be ª able to use the remote control to switch it on again from this state. 111 Musiccenter...
pLAYing A Cd PLaYing a CD You do not need to select CD Player mode fi rst to play a CD. Slide a CD into the CD slot directly below the display. The CD is pulled in automatically as soon as ª...
Page 7
The input is now selected. You can also change the phase using the button on the right-hand edge of the screen. Select the best sound setting by repeatedly pressing the button. When you select a digital source, you can also select the sampling rate. 111 Musiccenter...