Installing The Device; Connecting The Wi-Fi Antennas; Connecting Analog Sources - Burmester 161 Owner's Manual

instAlling the Device

Installing the device

Connecting the Wi-Fi antennas

The Wi-Fi antennas are required to connect a computer (iPad®, tablet, Mac, PC) to the
device via Wi-Fi .
Damage due to missing or incorrect connection
Not connecting the antennas could damage the Wi-Fi unit. Tightening the antennas
too tightly could damage the connections.
►
Always mount both antennas, even if you don't use Wi-Fi .
►
Only tighten the screw base finger-tight . Do not use a tool .
►
Mount the two supplied antennas on the antenna sockets on the rear panel .

Connecting analog sources

►
Use the terminal to connect an analog signal sources with balanced interconnect
cables .
►
Unbalanced cables can be used at the same terminal in connection with the
supplied XLR-RCA adapters .
14
ATTENTION