The Remote Control - Burmester 161 Owner's Manual

the Device At A glAnce

The remote control

The supplied remote control allows the control of the devices's playback functions .
Advanced options are available from the optional iPad® app and the web interface and
are described in more detail in the separately enclosed instructions .
29
30
31
32
33
34
35
36
37
38
39
40
12
29 Power on/off
Power on the Phase 3 or set it to stand-by mode .
30 Number keys
Enter numbers to display device settings (see OSD)
and to select a track directly .
31 Change the volume
32 Change information on the display
33 Playback control:
Stop playback .
Start playback or pause ongoing playback .
CD, Player, TIDAL: Skip to the beginning of the track currently
playing . Pressing twice skips to the previous track .
Internet radio: Navigate between stations in the station list .
Move playback back by 10 seconds .
Internet radio: Not assigned
Move playback forward by 10 seconds .
Internet radio: Not assigned
CD, Player, TIDAL: Skip to the next track .
Internet radio: Navigate between stations in the station list .
34 Sources:
TUNER Selects Internet radio or, if pressed again,
TIDAL as signal source .
PHONO Selects the analog input as source .
TAPE Playback of internally stored music .
DISC Selects sequentially USB or CD as source .
AUX Switches sequentially between TV input and digital inputs .
35 Shuffle
36 Repeat
37 Smooth
38 AUDIO Switch between 96 kHz and 192 kHz sampling frequency .
39 DIM dims the Display .
40 OSD Display and change device settings .
►
To display device settings, first press the OSD button and then
enter one of the following codes using the number keys on the
remote control:
– 1 – 1 – 1: IP address and MAC address
– 2 – 2 – 2: Serial number and device versions (see page 32)
– 2 – 5 – 8: Perform a firmware update (see page 32)
– 7 – 8 – 9: Switch between standard, Wi-Fi and stand-alone
mode (see page 21)