Blackmagic Ursa Settings; Dashboard - Blackmagicdesign Blackmagic URSA Installation And Operation Manual

Media Timeline
The media timeline displays the recording and playback status of your CFast cards. The dot and
clip indicators illuminate different colors depending on use: Red when writing to the card, green
when reading the card, and yellow in the event of a card error. As a new clip is recorded, the
active slot displays a new clip on the timeline. The time remaining indicator at the end of each
timeline displays the remaining minutes and seconds of recording time for each CFast card and
displays FULL when a card reaches maximum capacity.
The dropped frames alert indicates when your CFast card is
dropping frames during recording. The red tips on the audio
scope waveform indicate when your audio has clipped.
When a card is full and you have an empty CFast card in the second slot, Blackmagic URSA will
automatically record to the other CFast card. To play a selected clip, press the 'play' button on
the fold out monitor transport controls, or on the outside of the door.

Blackmagic URSA Settings

Dashboard

On Blackmagic URSA press the 'display' button marked DISP on the control panel to open the
dashboard. You can also tap on icons to hide or show meters and guides on the LCD monitor, or
format your CFast cards.
Press the display button below a touchscreen to open the dashboard.
Blackmagic URSA Settings 27