Configuring The Palm Vein Sensor; Using The Security Lock - Fujitsu LIFEBOOK U727 Operating Manual

Security functions
Configuring the palm vein sensor
Palm veinsensor Palm veinsensor
Whether your device has a palm vein sensor depends on the device
configuration you have ordered.
The palm vein sensor can record the image of the pattern of the veins of the hand. This image
is evaluated by additional software and can be used instead of a password.
The current Workplace Protect software for palm and fingerprint sensors can be found on
the Internet at
http://www.fujitsu.com/us/support

Using the Security Lock

Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You
can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook
from theft. The Kensington Lock Cable is available as an accessory.
Fujitsu recommends the use of a combination lock.
Attach another Kensington Lock Cable to your Port Replicator to protect your Port
Replicator from theft as well. There are two security lock devices on your Port Replicator.
52
1
K
► To be able to use the palm vein sensor
(1), you must install the software.
► Fit the Kensington Lock Cable to the
mechanism on your notebook.
Anti-theftprotection Mechanicalbackup Security Lock UsingtheKensingtonLock Cable
Fujitsu