Sound Quality
Take note that MP3-CD compilations should
best contain only MP3 tracks (.mp3). To
achieve a good MP3 quality, a bit rate of
128 kbps is recommended.
Loading discs
1
Press OPEN/CLOSE to open the disc tray.
2
Load up to two discs on the individual disc trays.
To load the third disc, press DISC CHANGE.
➜ The disc tray will rotate until the empty tray
is ready for loading.
3
Press OPEN/CLOSE to close the disc tray.
➜ "READING" is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
➜ For MP3 disc, the name of the first album
and title will be scrolled through the display once
and followed by "AXX TXXX".
Notes:
– Load the discs with the label side facing up.
– For MP3 disc, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.
CD/VCD/MP3-CD Operations
Playing discs
To play all discs on the disc tray
G PressÉ Å .
➜ All the available discs will play once, then stop.
➜ During playback, the selected disc tray, track
number and elapsed playing time of the current
track are displayed.
➜ For MP3 disc,
mode discs, only one mode will be selected for
playback depending on the recording format.
To play the selected disc only
G In CD mode, press VCD 1, VCD 2 or VCD 3
on the system.
➜ The selected disc will play once, then stop.
To interrupt playback
G PressÉ Å .
➜ The current track time flashes.
G To resume playback, pressÉ Å again.
To stop playback
G Press Ç.
Replacing discs during playback
1
Press DISC CHANGE.
➜ The disc tray will open without interrupting
current playback.
2
To change the inner disc, press DISC
CHANGE again.
➜ "DISC CHANGE" is displayed and the disc
will stop playing.
➜ The disc tray will close to retrieve the inner
disc, then reopen with the inner disc accessible.
a disc is loaded in the disc tray
the current selected disc tray is empty
the current selected disc tray is loaded
or playing
is shown. For mixed
TITLE
17