Table of Contents
Advertisement
No.
Display
Cyclic Embroidery
Prompt
Taping mode
Offset Point
5
Assistant
Operation Status
Network
Connection Failure
Current
Change Order
6
Design
7
Information
Decreasing
Main Shaft Speed
8
Increasing
Main Shaft Speed
BECS- A18/A58 computerized embroidery machine owner's manual
Chapter 2 Embroidery Guide
Name
The machine is currently set with cyclic
embroidery. Click
management screen, in which the cyclic
parameters can be set.
Press relative icon to select the embroidery mode
you need
The machine is currently set with offset point.
When entering the embroidery confirmation
status
management screen, in which you can set offset
point.
Click
any one of embroidering along the design range,
one line, one cross and the design outline, and
then the icon
back to the main screen.
Network status （ unconnected
, register successfully
Color
The order of the numbers represents the
needle-changing
three-dimensional icon represents the current
icon.
Related design information is displayed in this
area.
the
It's used to decrease the main shaft speed (until
the set lowest speed).
the
It's used to increase the main shaft speed (until
the set highest speed).
Description
to enter the parameter
(before starting embroidery), click
to
enter
the
assistant
to enter other functions and select
will appear after coming
）
sequence.
operation
, connected
And
the
13
Hide quick links:
Advertisement
Table of Contents
