Set Frame Soft Protection - DAHAO BECS-A18 Owner's Manual

2. Click "Frame Origin Recovery"
If it is "auto set frame origin", the machine will automatically move to the frame zero
point and then back to embroidering position before power-off. It will be invalid if the
operation of "manually set frame origin" is done.

10.5 Set Frame Soft Protection

This function is to set the embroidery range set in the software, and limit the machine
embroidering to this range.
1. Click
2. Click "Set Frame Soft Protection"
3. If have already established the software protect, the system hints the customer to
clean original constitution.
4. After click the confirm key, establish the coordinate in the right-up corner.
Use the move frame key on panel to move the embroidery frame, to confirmed right-up
corner point of soft limit position, click
5. Move embroidery frame, input coordinate of right-down corner of soft limit
position.
96
Chapter 10 Other Functions
in the main screen to enter the "Other functions" screen.
BECS-A18/A58 computerized embroidery machine owner's manual
to confirm.