Step 4: Connecting Fm/Mw Antennas; Step 5: Connecting The Power Cord - Philips FW-D596 User Manual

Step 4: Connecting FM/MW
antennas
fix the claw
into the slot
MW ANTENNA
DIN OUT
● Connect the supplied MW loop antenna to the
MW jack. Place the MW loop antenna on a
shelf or attach it to a stand or wall.
● Connect the supplied FM antenna to the FM
jack. Extend the FM antenna and fix its end to
the wall.
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
MW ANTENNA
Notes:
– Adjust the position of the antennas for optimal
reception.
– Position the antennas as far as possible from
your TV set, VCR or other radiation sources to
prevent unwanted interference.
FM
antenna
MW
antenna
FM ANTENNA
FM ANTENNA
Connections
Step 5: Connecting the power
cord
DIN OUT
SUBWOOFER
OUT
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT ~ AC MAINS
Pb/Cb
VIDEO IN
Y
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
On the DVD Mini Hi-Fi System
"AUTO INSTALL-PRESS PLAY" may appear
on the display panel. Press 2; on the front panel
to search and store all available radio stations or
press 9 to exit (See page 35, Tuner Operations-
Presetting radio stations).
If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR
to the local power line voltage.
Power Outlet
VOLTAGE
SELECTOR
110V-
127V
220V-
240V
NOT FOR ALL
VERSIONS
13