Powering Unit On/Off & Mounting Unit - Cobra SLR 600 Operating Instructions Manual

Thank you for purchasing Cobra® VedettaTM Series, Model SLR 500/
SLR 600 Radar/Laser Detector. Please familiarize yourself with the
capabilities your new detector can provide by reading this manual.
Also, please be careful when using your new detector while driving.
Powering Unit On/Off & Mounting Unit
Plug in the detector using the included cigarette lighter power cord.
Press the Power button momentarily to turn the unit On (or Off).
Note: To change display orientation, press and hold the Power
button for 2 seconds.
a. Windshield Mount
Power Jack
Power Button
Attach to windshield
Lift lever on suction cup base before attaching to the windshield.
Once attached, push against windshield and lock the lever down.
Use the ball-joint adjustment and make sure the detector unit is
aligned level and pointing straight ahead. The display can be in
flip-up or flip-down position to suit preferred mounting location,
and rotated to face directly toward you. Renew suction cup with
a damp cloth or by rinsing under tap water.