Hardware Connection - Zte ZXDSL931WII User Manual

ZXDSL 931WII User Manual
Rear panel
Interface
DSL
LAN1-LAN4
Power
Side panel
Interface
ON/OFF
WPS
Reset
WLAN
USB

3.2 Hardware Connection

Connection 1
The following connection method is recommended.
Figure 3.2-1 shows the connection of ZXDSL 931WII, computer, splitter and telephones.
Figure 3.1-2 ZXDSL 931WII Rear Panel
Table 3.1-2 Interfaces on the Rear Panel
Function
RJ-11port：Using the telephone line to connect the
modem with the VDSL2 cable or splitter
RJ-45 port : It is used to connect the modem to
computer or other network devices
Power supply port: It is connected to the power adapter
Figure 3.1-3 ZXDSL 931WII Slide Panel
Table 3.1-3 Slide Panel LEDs
Power switch, to power on or power off the device.
WLAN Protected Setup
When the power is on, press the button for more than five seconds to restore the factory
default settings, and then the system restarts automatically.
WLAN switch, to enable or disable the WLAN function.
USB interface, connects to a USB device.
Function