Using The Menu Control; Manual Tune - Philips DAB FM radio AE5900 User Manual

DAB Radio
7: Signal Error Rate: If the transmisstion
signal contains errors, the system can apply
correction.The amount of signal correction
can be displayed as a numerical value
between 0 and 99. As the value increases, the
signal will be degraded.To improve reception,
try adjusting the position of the antenna.

Using the MENU control

The menu control lets you access the DAB
radio setup options.
1 In DAB mode, press MENU to enter the
menu options.
➜ The first setup option "Manual tune" is
displayed.
2 Press to scroll up and down the menu
1 / 2
options:
Manual tune -> Autoscan local -> Autoscan
full - > Clock - > DRC value -> Sw version
3 To select an option, press SELECT.
4 Repeat steps 2-3 if sub-option is available
under one option.
Helpful hints:
– In FM/AUX IN mode,when you press MENU
there are only two options: Clock and Sw
version.

Manual tune

By using this feature, it is possible to manually
tune to a specific channel/frequency. In addi-
tion to antenna orienting for better radio
reception, the optimum reception can also be
obtained by using this feature.
1 In DAB mode, press MENU to display
"Manual tune" option.
2 Press SELECT to make a selection.
➜ Display shows a channel and its frequen-
cy.
3 Press repeatedly until desired
1 / 2
channel/frequency appears.
4 Press SELECT to confirm the selection.
➜ The second line of the display shows the
selected channel and its frequency. The
first line of the display shows a rectangle.
The position of the rectangle indicates
the degree of signal strength (The further
towards the right, the greater the signal
strength. See
5 Adjust the position of the antenna to obtain
the optimum signal strength.
6 Press SELECT to return to normal display.
➜ You may press DISPLAY to change the
service information on the display.
CLOCK
CLOCK lets you enter time and alarm setting
options:
1 In DAB/FM/AUX IN mode, press MENU to
enter menu options.
2 Press repeatedly until "Clock" appears.
1 / 2
3 Press SELECT to confirm the setting.
4 Press to select the options:
1 / 2
Set alarm - >Alarm On/Off - >
Snooze- > Sleep- > Auto-set Clock- >
Set clock- >kitchen time
– "Auto - set clock" option is not available in
FM or AUX IN mode.
5 Press SELECT to confirm the setting.
Set alarm
Make sure you have correctly set the time
before you set the alarm.
1 In "Set alarm" mode, press
➜ Press SELECT to switch hour setting to
minute setting.
2 Press SELECT to confirm the setting.
➜ "Alarm source" appears.
3 Press to select the alarm sound source:
1 / 2
DAB - > FM - > BUZZER
➜ "Set alarm date" appears.
4 Press to select the options:
1 / 2
Once- > Daily
5 Press SELECT to confirm the setting.
4).
to set time
1 / 2