Checking The Leds - Cisco Aironet 1530 Getting Started Manual

Checking the LEDs

One LED is located between the LAN and PoE-In connectors. It indicates the status of the access point
power, uplinks and radios.
additional LED signal information.
Figure 10 Access Point LEDs –Shown on the Bottom of AP 1532E
Table 3 Access Point LED Signals
LED Message Color
Type
Boot loader Blinking
status sequence
Figure 10 identifies and describes the LED functions.
Meaning
Green Boot loader status sequence:
• DRAM memory test in progress
• DRAM memory test OK
• Board initialization in progress
• Initializing FLASH file system
• FLASH memory test OK
• Initializing Ethernet
• Ethernet OK
• Starting Cisco IOS
• Initialization successful
Table 3 provides
LED
Indicator
33