Security - ROHS QSM-622E User Manual

3.4 Security

The Security menu sets up the administrator password.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the USer will
have Administrator rights.
The password length must be
in the following range:
Minimum length
Maximum length
Administrator Password
User Password
Version 2.17.1255. Copyright (C) 2016 American Megatrendes, Inc.
Setting
Administrator
Password
User Password
Chipset
Security
Description
To set up an administrator password:
1. Select Administrator Password.
The screen then pops up an Create New Password
dialog.
2. Enter your desired password that is no less than 3
characters and no more than 20 characters.
3. Hit [Enter] key to submit.
To set up a user password:
1. Select User Password.
The screen then pops up an Create New Password
dialog.
2. Enter your desired password that is no less than 3
characters and no more than 20 characters.
3. Hit [Enter] key to submit.
Boot
Save & Exit
3
20
- 37 -
Set Administrator
Password
→←: Select Screen
↓↑: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save and Exit
ESC: Exit
BIOS