ROHS QSM-622E User Manual page 41

3.3.1.1 Intel IGD Configuration
Setting
GOP Driver
Integrated Graphics
Device
IGD Turbo
Primary Display
PAVC
DVMT Pre-Allocated
DVMT Total Gfx Mem
Apeture Size
DOP CG
GTT Size
IGD Thermal
Spread Spectrum clock
ISP Enable/Disable
ISP PCI Device Select
Vcc_Vnn Config For
Power State2
Enable (default) or Disable GOP Driver.
Enable (default) or Disable IGD when selected
as the primary video adapter. If disabled, IGD will
always be disabled.
Enable (default) or Disable IGD turbo mode.
Select which of IGD/PCI graphics device should be
primary display.
Options: Auto (default), IGD, PCIe and SG.
►
Set the Protected Audio Video Control mode.
Options: Disabled, LITE Mode (default) and
►
SERPENT Mode.
Select the DVMT 5.0 Pre-allocated (Fixed) Graphic
Memory size used by the Internal Graphic Device.
Options: 64M is the default.
►
Select the DVMT 5.0 Total Graphic Memory size
used by the Internal Graphic Device.
Options: 128MB, 256MB (default) and Max.
►
Select the Apeture Size.
Options: 128MB, 256MB (default) and 512MB.
►
Enable (default) or Disable DOP Clock Gating.
Select the GTT Size.
Options: 1MB and 2MB (default)
►
Enable or Disable (default) IGD Thermal.
Enable or Disable (default) Spread Spectrum clock.
Enable (default) or Disable ISP PCI device
selection.
Default ISP is PCI B0D2F0 for Window Boot. Linux
Boot to select B0D3F0.
Options: Disabled, ISP PCI Device as B0D2F0
►
(default) and ISP PCI Device as B0D3F0
Enable or Disable (default) Vcc Vnn Config for
Power State2.
- 31 -
Description
BIOS